Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Fireplace Services Across Sellersville
Fireplace service in Sellersville usually costs $165-$420 for a standard inspection and cleaning, and $400-$1,800 for damper or firebox repair depending on what the camera finds. Most jobs at homes near Main Street or over by Lake Lenape Park are done within one visit, because we keep common liner and damper parts on the truck. Wendell and his crew have worked Sellersville’s older homes long enough to know which chimneys were built for coal and which were built for wood. That distinction matters more here than almost anywhere else in Bucks County. Call (484) 603-6713 for an honest look at what you actually need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Top Hat Chimney Is Sellersville’s Preferred Fireplace Services Company
Ask anyone on your street. Wendell Pike started Top Hat Chimney in 1999, and he still puts his name and license number on every job. That means when a Sellersville homeowner on Noble Street or over near the borough’s old mill blocks calls, the person who answers may well be Wendell himself. Not a call center. Not a franchise that rotated in last spring.
The difference shows up in small ways. We know that tight rowhouse streets off Main Street have roof access challenges, so we send a sweep who has been up those roofs before. We know the Victorian homes near Washington Avenue carry original clay flue tiles that are often cracked and spalling. And we know that a gas furnace venting into a shared stack can push carbon monoxide into a neighbor’s fireplace if the flue was never relined. National chains treat Sellersville like any other zip code. We treat it like the place where we run into you at Landis Market on Saturday.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back at no additional cost. That’s not a slogan. It’s stamped on the invoice. And before a single tool comes off the truck, you get the flat price. No surprises at the door.
Our Fireplace Services in Sellersville
Our Fireplace Services team handles everything from a simple sweep to a full conversion back to wood. Here’s what we see most often in Sellersville homes.
Gas Fireplace Service
A gas fireplace in a Sellersville rowhouse is rarely just a gas fireplace. It’s usually sitting inside a chimney that was built in 1910 for a coal furnace, and the flue was never sized for gas. That means poor draft, delayed ignition, and sometimes a smell of combustion gas in the living room. We service the gas log set, the thermocouple, the pilot assembly, and the flue above it, because the flue is usually the actual problem. A typical gas fireplace service and inspection runs $165-$260 in Sellersville.
Wood Burning Fireplace
If you live in one of Sellersville’s Victorian homes near the old industrial district and you still burn wood, your chimney should be inspected every year. Not every other year. Not “when we get around to it.” The original clay tile liners in these chimneys are often 100 years old, and the freeze-thaw cycling that Sellersville gets in the upper Bucks County winters keeps widening the mortar joints. A Level 2 camera inspection costs $270-$380 and shows us exactly what is happening inside the flue, including the parts you can’t see from the firebox. The camera footage and a plain-English verdict, every time, no exceptions.
Fireplace Insert
Adding a woodstove or fireplace insert to a Sellersville chimney that was originally sized for coal is a heavier lift than most homeowners expect. The flue is almost always oversized, which means the insert will draft poorly and the flue will collect glazed creosote faster than a correctly sized liner would. We typically run a DuraFlex stainless liner through the existing flue, insulate it, and connect the insert properly. Insert liner work in Sellersville runs $1,900-$3,400 depending on flue height and roof access. It’s not cheap, but it’s the difference between a clean burn and a chimney fire waiting for the coldest night of the year.
Damper Repair
A damper in a Sellersville rowhouse does more than keep cold air out. In attached housing, a failed damper can let a neighbor’s combustion gas backdraft into your living room when they share the stack. We rebuild, replace, or retrofit dampers with top-sealing models where the old throat damper has warped or crumbled. Most damper repairs in Sellersville run $400-$950, and we usually complete them in a single visit.
Trusted Brands We Service in Sellersville
Wendell and his crew install and service products from DuraFlex, HeatShield, and Olympia Chimney. We stock common liner components, top-sealing dampers, and sheet-metal parts for Sellersville customers, which means we’re not waiting on a distributor when your furnace is venting into a shared stack. HeatShield is especially relevant here, because it lets us resurface a deteriorated smoke chamber without tearing out the original brick. On a tight rowhouse street where neighbors share a wall, that can mean the difference between a half-day repair and a two-week masonry job. Our Fireplace Services in Sellersville page covers this in more detail.
Common Fireplace Services Problems We See in Sellersville Homes
- Shared flues and cross-contamination. In Sellersville’s older attached housing, two or three homes can vent into the same stack. When one neighbor’s gas furnace backdrafts, combustion gases can push into your fireplace. We camera-test the full stack before anyone burns a fire.
- Coal-to-gas conversions left unlined. Many Sellersville rowhouses had coal furnaces originally. The flues were later adapted for gas without a liner. Oversized flues draft poorly and build glazed creosote fast when wood is added. This is the single most common failure we see on the borough’s oldest blocks.
- Freeze-thaw spalling on original masonry. Sellersville sits inland and gets sharper freeze-thaw cycles than communities closer to the Delaware River valley. That steady expansion and contraction widens mortar joints and flakes the brick faces of chimneys on Memorial Drive, 4th Street, and the streets off Main.
- Crumbling dampers in rowhouse fireplaces. Century-old cast iron dampers crack and warp. In an attached home, that’s not just a draft issue. It’s a possible route for a neighbor’s flue gas to enter your living room. We replace them with modern top-sealing dampers sized to the original throat.
Pricing for Fireplace Services in Sellersville, PA
Here’s what you can expect to pay in Sellersville, not in King of Prussia or Doylestown. A standard fireplace inspection and sweep runs $165-$260. Adding a Level 2 camera inspection brings the total to $270-$380. Damper repair runs $400-$950. Firebox repair, depending on the extent of firebrick replacement, runs $650-$1,800. A full reline for a converted coal chimney runs $1,900-$3,400. A fireplace conversion from gas back to wood, including liner and damper work, typically lands between $2,300 and $3,900. Your flue doesn’t care how the fire looks. It cares how it breathes. Call (484) 603-6713 and Wendell will give you a flat upfront price before any work starts. There’s no trip charge for calls inside the county, and we’ll give you a free second opinion on any written estimate you’ve already received.
We Also Serve Cities Near Sellersville
We work throughout the upper Bucks County boroughs and townships around Sellersville, including Perkasie, Telford, Franconia, and Souderton. Same flat pricing. Same 90-Day Done Right Promise. Call (484) 603-6713 if you’re in one of those nearby communities and need an honest chimney or fireplace assessment.
Serving Sellersville, PA - Our Local Coverage Area
We’re based in the Sellersville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fireplace Services in Sellersville
A shared chimney stack in Sellersville’s attached housing means your fireplace’s draft is affected by what your neighbor’s appliances are doing. If their gas furnace or water heater vents into the same stack and the flue tiles are cracked or spalled, combustion gas can backdraft into your firebox on windy days. The fix is usually a properly sized liner that isolates your flue. We camera-test shared stacks before anyone lights a fire. Call (484) 603-6713 for a free estimate on a Level 2 inspection.
Almost always, yes. The original flue was sized for coal, which produced cooler, higher-volume exhaust. Gas produces less exhaust heat and drafts poorly in an oversized, unlined flue. That causes condensation, acidic corrosion, and poor performance. Before you burn wood in that fireplace again, the flue needs to be checked with a camera and typically relined. We use DuraFlex liners for exactly this job. Call (484) 603-6713 for an honest camera inspection and a plain-English verdict.
Because Sellersville’s housing stock skews heavily pre-1940, and the original masonry and clay tile liners in those chimneys are at or past the end of their serviceable life. The inland freeze-thaw cycling steadily widens mortar joints, and the mill-era chimneys often have soft brick and spalling clay tiles. A brush sweep only removes creosote. It does not find a cracked flue liner or a failed smoke chamber. Once a year, burn or no burn. Chimneys break in the off-season too. We recommend a camera inspection before the burning season, not after a chimney fire.
You can, but only after the chimney is relined. The oversized coal flue will not draft correctly for a woodstove insert, and it will accumulate glazed third-degree creosote faster than a correctly sized liner would. That’s the pattern we see on Sellersville’s oldest blocks: coal chimney, gas conversion, no liner, and then a woodstove added on top. The result is a chimney fire risk that an annual sweep alone cannot control. A proper DuraFlex liner plus insulation typically runs $1,900-$3,400 in Sellersville. Call (484) 603-6713 and we’ll tell you exactly what your chimney needs.
Third-degree creosote is the glazed, tar-like form of creosote that forms when wood smoke condenses in a cool, oversized flue. It is extremely flammable and cannot be removed with a standard brush. First-degree creosote is a brush job. Third-degree is a glaze. Sellersville’s adapted coal chimneys are oversized for modern wood burning, which cools the smoke too quickly and creates exactly the conditions that produce glazed creosote. If you have an older borough home that was originally coal-heated, ask Wendell about a camera inspection before you burn again. Call (484) 603-6713 for a free estimate.
Get an Honest Assessment Before You Burn Another Fire
If you live in Sellersville and you have not had your fireplace checked in a year or more, now is the time. Not because we need the work. Because your flue does not care how the fire looks. The shared stacks, coal conversions, and freeze-thaw damage in this borough fail differently than the newer homes in the townships around it. Wendell and his crew will camera-test, give you the footage, and tell you plainly what needs doing and what can wait. Call (484) 603-6713 for a free estimate. A live person answers, and it may well be Wendell himself.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Sellersville since 1999.