Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Hellertown
Chimney cap and crown work in Hellertown usually runs $350-$900 for a standard cap replacement and $600-$1,400 for a full crown rebuild, with most jobs completed in a single visit. If you’re on the old borough grid near Main Street, Durham Street, or the Saucon Creek corridor, you’re dealing with a chimney that’s likely 80 to 100 years old, and the crown at the top of that stack has been taking a beating from freeze-thaw cycles every winter. We work these blocks constantly, and we’ll give you a straight answer backed by camera footage before any recommendation is made. Call (484) 603-6713 for a free estimate.
Why Top Hat Chimney Is Hellertown’s Preferred Chimney Cap & Crown Company
Wendell Pike has been running Top Hat Chimney since 1999, and the kind of chimney work Hellertown needs is exactly the kind he’s been doing for over 29 years. Homes in the borough weren’t built with modern flue standards in mind. They were built for coal. When we walk up to a house on Clauser Street or East Depot Street, we already know what we’re likely to find before the ladder even comes off the truck. That’s not guesswork. It’s pattern recognition from doing this work block after block across the same compact grid.
Our customers in Hellertown keep our number because Wendell answers the phone himself, or one of his crew does, and the price quoted before work starts is the price on the invoice. No bait-and-switch, no “we found something extra” routine. Every job carries the 90-Day Done Right Promise in writing. If it isn’t right, one call brings us back at no charge. We also offer a free second opinion on any written estimate from another company, and there’s no trip charge for calls inside our service county. Seniors and veterans always get 10% off.
Our Chimney Cap & Crown Services in Hellertown
Cap Replacement
A missing or rusted-out cap on a Hellertown chimney does more than let rain in. It lets animals in, it lets leaves and debris pile up, and on a coal-era flue that now vents a small gas furnace, it makes an already oversized and too-cold stack draft even worse. We replace caps on chimneys throughout the borough, and we stock standard sizes for common Hellertown flue dimensions so we can often complete the job on the first visit. If the flue is an odd coal-era size, we’ll measure and order rather than wedge in something that sort of fits. Call (484) 603-6713 for a free estimate on a cap replacement anywhere in Hellertown.

Crown Repair
The crown is the concrete slab at the very top of the chimney, and in Hellertown it fails in a predictable way. Original crowns on pre-WWII brickwork were poured without a drip edge, so water runs straight down the brick face instead of dripping away. Then Saucon Creek valley winters freeze that water inside the mortar joints, and the freeze-thaw cycles spall the crown apart year after year. When we repair a crown in Hellertown, we rebuild it with a proper overhang and a drip edge so water sheds away from the stack, not into it. We’ve done this on homes from Rentzheimer Drive to the neighborhoods around Dimmick Park.

Custom Cap
Some Hellertown chimneys have flue configurations that off-the-shelf caps simply won’t fit, especially the multi-flue stacks serving both a gas furnace and a wood fireplace. When that’s the case, we fabricate a custom cap to the exact dimensions of your flue tile, using stainless or copper depending on what the homeowner wants and what the exposure demands. A custom cap costs more than a stock unit, but on an oversized coal-era flue it’s often the difference between a cap that actually seals and one that just sits there looking like it’s doing something. We’ll show you the measurements and the options before we cut anything.

Crown Coating
If your Hellertown crown has minor surface cracking but the structural concrete is still sound, a flexible crown coating is a practical alternative to a full tear-out and repour. We use a material that moves with the thermal expansion of the chimney instead of cracking against it. But we’re honest about when coating is enough and when it isn’t. In Hellertown, where the original crowns on 1920s and 1930s chimneys often have no expansion joint to speak of, a coating applied over a crown that’s already loose from the brick is money wasted. We’ll tell you plainly which situation you have, and we’ll show you the camera footage to back it up.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hellertown
We install and work with caps, crowns, and liner components from Olympia Chimney, Famco, and Copperfield. These are the brands we stock parts for and trust on Hellertown chimneys because they hold up to the specific abuse this valley dishes out: hard freezes, damp springs, and flues that run cold because they’re venting a gas furnace instead of a coal fire. We keep common replacement parts on the truck, so when we’re on a routine cap job near the Hellertown Pool or along Water Street and find a secondary issue, we can usually handle it the same day.
For more details on all the cap and crown work we do across the region, visit our complete Chimney Cap & Crown service page.
Common Chimney Cap & Crown Problems We See in Hellertown Homes
- Spalled crowns from Saucon Creek valley freeze-thaw cycles. Original crowns on Hellertown’s pre-WWII brickwork were poured without drip edges, so winter moisture seeps into the concrete, freezes, expands, and cracks it apart. You won’t always see the damage from the ground, which is why we run a camera up before we quote anything.
- Missing or rusted caps on coal-to-gas converted chimneys. When a Hellertown chimney built for coal now vents a small gas furnace, the flue runs colder than it ever did, and a missing cap lets rain and animals into an already compromised stack. We see this on block after block of the old borough grid.
- Crown cracks from condensing flue gases. Gas appliances produce water vapor that condenses on the cold walls of an unlined coal-era flue, and that acidic moisture eats at the mortar at the top of the stack. It’s a slow failure, but by the time you see the stains on the chimney face, the crown is usually already cracked.
- Multi-flue stacks with incompatible caps. Homes on streets like Juniper Road or Easton Road often have two flues sharing one chimney, one for a gas furnace and one for a fireplace, and a stock single-flue cap that doesn’t fit either one properly. We fabricate custom multi-flue caps for these, sized to the actual flue tiles.
Pricing for Chimney Cap & Crown in Hellertown, PA
Here’s what you can expect to pay in Hellertown for cap and crown work. A standard stainless steel cap replacement runs $350-$650, including materials and installation. A custom multi-flue cap for a coal-era stack with odd flue dimensions runs $550-$900. Crown repair with a proper drip edge and overhang runs $500-$900. A full crown rebuild where the existing concrete is beyond saving runs $800-$1,400. Crown coating as a preventive measure runs $300-$500. Every quote is free, every quote is in writing, and the number we give you before work starts is the number on the invoice. Wendell does not play games with pricing. Call (484) 603-6713 and you’ll get the same number on the phone that you’d get if we were standing in your living room.
We also stand behind the work with the 90-Day Done Right Promise, which is printed on every job. If something isn’t right, one call and we’re back out. No arguing, no invoice. That’s the whole promise.
We Also Serve Cities Near Hellertown
We work throughout the Saucon Valley and upper Bucks County. If you’re in Quakertown, Emmaus, Macungie, or Perkasie, we cover those areas too, and the same pricing, same camera-first approach, and same 90-Day Done Right Promise apply. For the full service picture across the region, see our dedicated Chimney Cap & Crown in Hellertown overview, or call (484) 603-6713 and we’ll get you scheduled.
Serving Hellertown, PA - Our Local Coverage Area
We’re based in the Hellertown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Hellertown
Because the original crowns were poured without a drip edge and without an expansion joint, and the Saucon Creek valley’s freeze-thaw cycles have been working on that concrete for 80 to 100 years. Water soaks into the crown’s surface, freezes at night, expands, and slowly fractures it apart. The damage often starts on top where nobody can see it from the ground. We confirm it with a camera before we recommend anything. If you suspect crown damage on an older Hellertown home, call (484) 603-6713 for a free inspection.
Sometimes, but not always. A cap is not a substitute for a liner. If the flue is oversized for the appliance it now serves, a cap will help with rain and animals, but it won’t fix the draft problem caused by a flue that’s too big to heat up and pull properly. In Hellertown, where coal-era flues now vent small gas furnaces on nearly every block, we’ll always run the camera and show you the condition of the flue before we recommend a cap alone. If it needs a liner, we’ll tell you that plainly. Call (484) 603-6713 and we’ll show you exactly what you’re working with.
A custom multi-flue cap sized to both flue tiles is the right answer for most Hellertown multi-flue stacks. Stock caps rarely fit coal-era flue dimensions properly, and a cap that doesn’t fit leaves gaps for rain, animals, and debris. We fabricate these on site or in our shop, in stainless or copper, depending on what the homeowner wants. The cost difference between a stock cap and a proper custom one is usually a few hundred dollars, and it’s the difference between a cap that works and one that doesn’t. Call (484) 603-6713 for exact pricing on your chimney.
A crown coating on a Hellertown chimney lasts roughly 5 to 7 years, depending on exposure and the condition of the underlying concrete. That’s not a guarantee, it’s what we see in the field. If the crown is cracked down into the brick or loose at the edges, coating is the wrong fix, and we’ll say so. We’d rather tell you the crown needs a rebuild now than take your money for a coating that fails in two winters. The inspection is free. Call (484) 603-6713 and we’ll put a camera on it.
Because the flue is still open to the sky, and an uncapped flue lets rain, squirrels, birds, and leaves fall into a stack that is now running cold and already drafting poorly. In Hellertown, the problem is compounded by the fact that most of these flues are oversized coal-era construction, so a gas furnace vented through them produces a weak, cold draft that an uncapped opening makes even worse. A properly fitted cap is a cheap fix that prevents a much more expensive one. Call (484) 603-6713 and we’ll get you a quote.
Why Hellertown’s Chimney Problem Is Different
Here’s what’s true about Hellertown that isn’t true a mile south in Saucon Valley Township or a few miles north in Bethlehem. The borough was built for Bethlehem Steel workers, and it was built fast, cheaply, and uniformly. Nearly every home on the old grid went up between 1910 and 1945, and nearly every one had a coal-fired furnace venting through a brick chimney sized for high-output coal combustion. Then, in the 1950s through the 1970s, those coal furnaces came out and oil or gas furnaces went in, and the flues were left as they were: oversized, unlined or clay-tiled, and never genuinely adapted to the new appliance.
That means cap and crown failures in Hellertown aren’t a scattered problem that shows up here and there. They’re a neighborhood-wide pattern. Walk down any block of the old borough and look at the chimney tops. Many of them are missing caps. Many more have crowns that are eroding. And the reason is the same house after house: a coal-era chimney that was never designed to serve a gas furnace is now running cold, condensing acidic flue gases, and failing from the top down.
On a recent job on a street in the old borough grid, our crew found a 1920s brick chimney with a badly spalled crown and no cap, serving a small gas furnace via an oversized coal-era flue. After showing the homeowner the camera footage of the cracked crown, missing wash, and deteriorated flue liner, we custom-fabricated a copper cap and rebuilt the crown with a proper overhang and drip edge, resolving the downdraft and water intrusion issues in one visit. That’s the kind of work we do in Hellertown every week.
This is also where the industry’s worst upselling happens. A homeowner hears “you need a new liner” or “that crown has to be rebuilt” and has no way to verify it. Our answer to that is simple: we don’t recommend work we can’t show you. Every single inspection includes camera footage of the actual condition of the flue, the crown, and the cap, and a plain-English explanation of what it means. If it can wait, we’ll tell you it can wait. If it can’t, we’ll show you why. Wendell’s name and license number are published because he stands behind what he says. When he tells you something needs doing, you’ll have the pictures to prove it.
Get Your Free Chimney Cap & Crown Estimate in Hellertown
If you live in Hellertown and you’re worried about the top of your chimney, the first step is a free inspection with camera footage. Call (484) 603-6713 and you’ll reach a live person, not a voicemail box, not a call center. We’ll schedule a time that works for you, give you a real arrival window, and call you if that window slips. The quote is free, it’s in writing, and it’s the same number before and after the work is done. That’s how Wendell has done it since 1999, and that’s how we’ll do it for you.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Hellertown and the Saucon Valley since 1999.





Before
After
Before
After
Before
After