Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Telford
A chimney cap and crown in Telford typically runs $350-$950 for standard cap work and $600-$1,600 for crown repair or coating, and most jobs are finished in a single visit. We’re Top Hat Chimney, and Chimney Cap & Crown work is exactly what our crew handles for homeowners across Telford, from the borough’s original brick blocks to the postwar Cape Cods and ranches that line the newer streets. Call (484) 603-6713 and you’ll get Wendell or someone from his crew on the line, not a call center.
The honest truth about caps and crowns is that they’re the first line of defense for the whole chimney. When they fail, water gets in. And once water gets into a century-old Telford stack, it works on the clay tile, the mortar joints, and the brick face until something gives. Usually quietly.
Why Top Hat Chimney Is Telford’s Preferred Chimney Cap & Crown Company
Wendell Pike started Top Hat Chimney in 1999 and he’s still the one who answers the phone, often at midnight when someone in Telford smells smoke and wants to know if it’s serious. There’s no franchise manager rotating through, no sales rep reading from a script. The name on the invoice is the same guy you’ll see at the grocery store on Saturday. That matters in a small town.
Every job we finish in Telford carries the 90-Day Done Right Promise in writing. If the cap leaks, if the crown cracks, if the draft isn’t right, one call brings us back at no charge. We don’t hide behind callbacks and voicemail. We also give a live arrival window and call if it slips. And we document everything with camera footage, so when we tell you a crown needs work, you watch the video with us before you spend a dime.
Our Chimney Cap & Crown Services in Telford
Cap Installation
A standard single-flue stainless cap in Telford runs $350-$550 installed, depending on the flue size and whether the existing cap is rusted in place and needs cutting off. We fit caps to the actual flue tile, not a guess. For older Telford homes with multiple flues in one stack, the number of caps you need often surprises people.
Cap Replacement
When a cap’s mesh is rusted through or the lid has lifted off in a storm, replacement is usually the cheaper fix. In Telford we see plenty of caps that were installed wrong in the first place, pressure-fit instead of mechanically fastened. A proper replacement is $400-$650 for most homes. We’ll always show you the old cap and the new one before we leave.
Crown Repair
The concrete crown at the top of a masonry chimney is where Telford’s freeze-thaw cycle does its worst work. Cracked crowns let water bead into the mortar and freeze, spalling the crown surface and pushing joints apart. A crown repair with patching compound and sealing runs $600-$1,200 in Telford. If the crown is beyond patching, we’ll tell you that too, and show you the video that proves it.
Crown Coating
For crowns that are structurally sound but showing surface cracks and hairline fractures, we use Gelco’s CrownCoat system, a flexible, waterproof membrane that bridges small fissures and shrugs off ice expansion. Crown coating in Telford runs $700-$1,500 depending on the crown’s footprint. It’s not a band-aid. Applied over a properly prepped crown with a slight pitch, it buys years of protection at a fraction of a tear-out.
Multi-Flue Cap
This is the service we talk about most on Telford’s older blocks, because most of the original borough homes have two or three flues in the same stack. A custom multi-flue stainless cap from Famco or Olympia Chimney runs $600-$950 installed. It covers the entire crown area, seals out rain across all flues at once, and stops debris from dropping into the dead flue where it can choke the active one.
Custom Cap
Odd-size clay tile, an off-center flue, a masonry stack that predates standard cap specs. Custom caps in Telford run $500-$900. We measure, order, and install. No tape measure guesses dressed up as custom.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Telford
We install and stand behind caps and crown products from Famco, Olympia Chimney, and Copperfield, and we keep the most common parts for Telford homes on the truck. That means fewer return trips and faster turnaround when a 90-year-old flue needs a cap that isn’t a standard shelf size. When the crown needs more than a patch, Gelco’s CrownCoat is our go-to.
Common Chimney Cap & Crown Problems We See in Telford Homes
- Cracked or spalled concrete crowns. Reason: Telford’s freeze-thaw cycles. The Perkiomen Valley’s shoulder seasons can swing 30°F in a day, and that repeated expansion splits concrete crowns open. Once open, water follows the crack into the masonry, and the whole stack starts degrading from the top down.
- Missing or rusted caps on abandoned flues from the coal-to-wood conversion. Telford’s oldest homes were built for coal furnaces, then repurposed for wood stoves or gas inserts. The old oil-furnace flue often sits uncapped or with a rotted cap, letting rain, leaves, and animals into the shared stack. That debris drops down and blocks the active flue’s draft without any visible warning from ground level.
- Improperly sized or unlined flues on century-old multi-flue chimneys. A flue built for coal is often far too large for a modern wood stove. The oversized cross-section slows the draft, letting creosote condense and build. First-degree creosote is a brush job; third-degree is a glaze. We catch the difference with a camera before it becomes a chimney fire.
- Debris dumped into a ‘dead’ flue blocking the active flue. Our crew has found leaves, tennis balls, and old bird’s nests packed into abandoned flues where homeowners assumed the stack only served one fireplace. When two flues share masonry, blockage in one can choke the draft in the other. The only way to know is a camera inspection.
Pricing for Chimney Cap & Crown in Telford, PA
Here’s what homeowners in Telford can expect to pay, without the phone-quote shell game. A standard single-flue cap install runs $350-$550. Cap replacement on a rusted or damaged cap is $400-$650. Crown repair is $600-$1,200. Crown coating with Gelco runs $700-$1,500. A custom multi-flue cap is $600-$950. Prices include the parts, the labor, and the camera-verified proof of the work. If the crown is beyond repair and needs a full rebuild, we’ll quote that separately after the video inspection, not before. Every Telford job gets a written estimate before a single tool comes off the truck. Call (484) 603-6713 for a free estimate.
And remember: $40 off any repair over $200. Free second opinion on any written estimate. No trip charge inside the county. And 10% off always for seniors and veterans.
We Also Serve Cities Near Telford
Our crews regularly work Chimney Cap & Crown in Telford and the surrounding communities, including Franconia, Souderton, Sellersville, and Harleysville. The freeze-thaw cycle doesn’t stop at the borough line. Neither do we.
Serving Telford, PA - Our Local Coverage Area
We’re based in the Telford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Telford
Because Telford’s original borough core was built for coal furnaces, and those homes have two or three flues stacked together in one masonry chimney. A standard cap fits one flue tile. A multi-flue cap covers the entire crown area across all flues at once. When one of those flues is abandoned and uncapped, debris and animals drop into the shared stack and block the active flue’s draft. A custom multi-flue cap from Famco or Olympia Chimney solves the root problem. Call (484) 603-6713 and we’ll camera-verify what your stack actually needs before quoting anything.
Yes, most of the time. If the crown has cracks and hairline fractures but the masonry below is sound, we can patch, pitch, and coat it with Gelco’s CrownCoat system in one visit. If the crown has spalled so badly that the mortar bed is compromised, a partial rebuild of the top courses may be needed. Either way, the camera footage shows you exactly what’s there. We never quote a full rebuild without visual proof, and we tell you plainly when a repair is enough. Call (484) 603-6713 for an honest assessment.
If rain is getting into the flue during storms, if you hear animals or debris dropping, or if smoke back-puffs into the room, you likely need a cap inspected. If the fire draws fine but the flue hasn’t been swept in over a year, a cleaning may be all it needs. The camera inspection answers this definitively. First-degree creosote is a brush job. Third-degree is a glaze. We’ll show you which you have. Call (484) 603-6713 to schedule a look.
Debris in an abandoned flue can block the active flue sharing the same masonry stack, causing poor draft, smoke back-puffing, and potential carbon monoxide intrusion. We’ve pulled leaves, animal nests, and old construction debris out of Telford flues more times than we can count. The fix is to clean out the dead flue, cap it properly, and camera-verify the active flue is clear. Call (484) 603-6713 and we’ll get a camera in there.
Yes. Telford’s burn season runs roughly October through April. That’s six months of creosote accumulation and six months of freeze-thaw working on the crown and cap. Once a year, burn or no burn, we recommend a visual inspection of the cap and crown, with a camera inspection of the flue interior. Chimneys break in the off-season too, and the spring window is when Telford homeowners catch problems before they compound. Call (484) 603-6713 to get on the list.
Written by Wendell Pike, Owner at Top Hat Chimney, serving Telford and the surrounding communities since 1999.